Start winding your spirals at the BOTTOM of the wire, not the top. You will put a hanging loop at the top later on, but NOT NOW.
Take hold of the wire GENTLY with your needlenose pliers, and slowly and gently COAX the wire into a spiral shape by moving it SIDEWAYS to form the first spiral. Continue reading
The first choice comes when you select two stones for your Hellenistic earrings. Try the .22 gauge wire first. Gently push the wire through the drill-hole in the bead to see if it will work. If EITHER bead is reluctant to accept the .22 gauge wire, switch to the much thinner .24 gauge wire.
The Greeks, Romans, Egyptians, Sumerians and Babylonians were incredible builders and engineers. This earring depends upon a bridge-engineering discovery they made many tens of thousands of years ago, that translates into bead technology as: a vertical wire will support a bead better than a horizontal wire. Continue reading
A Celtic Bead Pendant is easy to make and fun to wear, and it will get compliments and lots of attention. Here’s the simple way to go about it:
Start with a 6 inch length of .14 gauge wire. Continue reading
It’s easy to make a pendant from a single piece of wire. Later, we’ll see how to use several pieces of differing dimensions to create a more complex form, but here’s the simple solution to a real Iron-Age Pendant.
Start with a 6 inch length of .12 gauge or .14 gauge wire.
With your needlenose pliers, gently COAX the wire into a nice, wide loop, big enough inside to accommodate not merely a chain, but the clasp of a chain as well. Like I said, big, roomy, lots of space in there. Continue reading
You can leave a large loop at the bottom of your earring element, so you can hang some dangling bits, called “spoons” and “paddles”, depending upon whether they are beaten or hammered with the ball part of your ballpein hammer, or the pein — flat — part.
A flat dangly bit is a paddle. A curved dangly bit is a spoon. I prefer paddles, because they’re easier and quicker to make and they run little risk of ending up sharp. Spoons must be hand-polished, paddles need no polish if made correctly.
I will run you through the drill for making paddles. Don’t forget that the only different between paddles and spoons is which end of the hammer-head you employ for the hammering.
Here’s what you do: Continue reading
There is no such thing as “scrap”. That’s my opening gambit for how to make a small independent jewelry company pay off well enough to keep you off the welfare rolls for as long as you can produce fine jewelry at a moment’s notice, and with my Method, you’ll be able to turn out splendid product for as long as you can still move your fingers.
“Scrap” is a headspace, a concept of waste mismanagement that can’t survive for very long in a jewelry studio, simply because it’s just too doggone expensive. You need to learn how to conserve energy in the form of effort, but also in the form of gold, silver, copper and gemstones. Continue reading
To begin with, an unorganized and messy studio will have a powerful impact on your ability to produce items for the marketplace. If you don’t care what you make or how it turns out or whether it ever gets actually worn, you have no problem working in a junkpile, but if you want to know what resources you have, and you want those resources to be findable, you’ll have to make some decisions about how your workbench will be arranged and what places on the workbench will do what jobs. Continue reading