This is the wave generator for the multiple wave surfing beach. If you’ve ever taken a Klepper Sailing Sea Kayak out with us at Long Beach on Vancouver Island, you’ll know what it feels like to paddle out to sea across the incoming surf waves. Hit it wrong, and you’ll spill. Same with these waves. Hit ’em wrong, and you’ll dump out or get deposited out the side of the wave far short of the beach. There’s a trick to it; in fact it’s the same move you’d make on actual water, so try that before you complain that it’s the Wave Rezzer that’s at fault.
Classes in Ho-Dad Greaser Surf School are scheduled every day — check with any Ashram Admin or Leadership folks to find out when and where they are held today. Meanwhile, here’s the Owner’s Manual for these incredible Action Waves:
Features:
* Adjustable wave Speed, Height, Duration & More.
* Simulation of waves swelling and crashing.
* Waves automatically clean themselves up if touching land or stationary objects.
* PusherName Options.
* All these options can be controlled Via Menu Screen when Left Clicking rezzer.
* You can upto 3sets out, Each Nitro is about 30M wide.
—————————————————
Quick-Start Guide
—————————————————
You can chat to the rezzer 20M distance or shout at the rezzer 96M distance.
1) Rez your Action Nitro Rezzer someplace on your sim/parcel where there’s water. Rezzer must be under the water on the seabed. At 5M or lower for waves to rez. To check the height of the terraform stand on the seabed & look at the Task Bar I.E. 25, 60, 0 the third number ‘0’ is the terraform hieght. ‘0’ is lowest level.
2) The arrows on the rezzer point in the direction they will travel.
3) Waves will spawn at some distance from the Rezzer (So make sure theres nothing in the way).
4) Before turning on the rezzer you may want to change the Duration (Determines how many seconds the wave runs). Left Click the rezzer/ Settings…/ Duration (Type in the amount I.E. 15).
5) Turn on the Rezzer and watch the waves. Left Click the rezzer/ Turn On
6) If your waves are stacking, then shooting off….Your on a laggy or low performance sim, heres how to fix that. Left Click the rezzer/ Turn Off. Then Left Click the rezzer (Again)/ Settings…/ Frequency (Type in the amount I.E. 25). This is how long in seconds it will take for the next wave to rez.
—————————————————
Interacting with the Action Nitro Rezzer
—————————————————
You can interact with the Rezzer to tune your waves to your liking. NOTE: this applies only to owners, not to users…
Stand near the Rezzer and left-click it… this brings up a main menu with options.
*Some buttons lead to sub-menus.
*Any button that leads to a sub-menu has ‘…’ after the name (for example, ‘Settings…’)
*There are other buttons marked ‘<<‘ and ‘<‘
– << Takes you all the way back to the main menu
– < Takes you to the previous menu
* When you click certain buttons, you will be prompted to type in a value in local chat (Must be within 20M of rezzer).
For example, setting the speed of the wave (Settings…->Speed) brings up a dialog telling you what
the current setting is along with the minimum and maximum values this setting can have.
*** Feel free to dimiss the dialog by clicking OK or Ignore (it’s just there to help you out).
* Once you successfully modify a setting, the Rezzer will notify you of the new value, and the Main Menu will be displayed.
* If you type in a value lower than the acceptable minimum, or a value higher than the acceptable maximum, the value you entered will be clamped to the acceptable range.
* Only you (the owner) will be able to change the settings on the rezzer.
—————————————————
Menus
—————————————————
1) Main Menu
—————————————————
This is the top-level menu where you can do basic stuff.
Status ——- Prints current settings to owner chat.
Reset ——- Resets everything to defaults.
Help ——- Gives you this notecard.
Turn On/Off ——- Toggle waves spawning or not.
Settings ——- Brings up the Settings sub-menu.
# Waves… ——- You can choose how many waves you want rezzed. 1-3
2) Settings Menu
—————————————————
This is the menu that lets you control various settings related to wave behavior.
Speed ——- Sets wave speed, in meters per second. (Default = 3.5)
Frequency ——- Sets the interval, in seconds, between waves. The lower the number, the more often waves spawn. (Default = 13)
Duration ——- Sets how long waves last, in seconds. (Default = 20)
Rise ——- Brings up Rise sub-menu.
Fall ——- Brings up Fall sub-menu.
PusherName ——- Choose A or B pusher types.
3) Rise and Fall Menus
—————————————————
‘Rise’ and ‘Fall’ refers to the behavior of the wave after it is first rezzed and when it is at the end of its run, respectively.
Rise and Fall are intended to simulate real-life waves swelling and crashing.
You can adjust how long it takes for waves to both rise and fall and how far beneath the surface of the water they start and end up.
Height ——- Sets Rise / Fall Height (in meters) below the water’s surface. (Default = -5)
Time ——- Sets the time it takes, in seconds for the wave to rise or fall. (Default = 2)
4) PusherName Menu
—————————————————
A ——- Makes the waves ‘Pusher’ work with ONLY Action Surfboards.
B ——- Makes the waves ‘Pusher’ Work with almost every board in SL including Actions.
_____________________________________________________________________________
If you have any questions or need help please contact…
– MarilynMonroe Munro
– bobn4uyes Winkler
_____________________________________________________________________________
★ Wave FAQ
– Waves Not Rezzing?
1. Make sure the rezzer is on the seabed & terraforming is below 5M.
2. Make sure the rezzer is on.
3. Make sure its set to the group that owns the parcel (NOT DEEDED).
– Waves lasting to long or not long enough?
* Change the wave duration (Settings…/Duration/Then type the desired number like 15 or 50). Determines how many seconds the wave runs, till dropping.
– Rezzing to many waves?
* Change the frequency (Settings/Frequency/Then type the desired number like 25). This option changes how many seconds it takes to rez another wave.
You can chat to the rezzer 20M distance or shout at the rezzer 96M distance.
_____________________________________________________________________________
Action also offers HUD driven Surfboards & Scripted Surfing obstacles.